Every pool owner should check the...
Every pool owner should check the most important parameters in his pool at regular intervals. This is the only way to ensure that water quality is maintained at an right level and to arrange dosing in an optimum manner.
7 Item Items
Warning: Last items in stock!
The Scuba II enables the operator to check the pool water quickly and accurately. The integrated sample chamber filled by immersing it in the water. A tablet reagent is added and generates a characteristic colour which can be measured using the photometric principle. The result is then displayed on the screen.
Five parameters, free chlorine, total chlorine, pH, alkalinity and stabilizer (cyanuric acid) are measured within a few minutes. Water analysis becomes a pleasure rather than a chore and more time is left for enjoying the pleasure of the pool.
If the Scuba II falls into the water it will simply float and, of course, it is watertight.
Why not try this compact test equipment -- after all, the knowledge that you are safe in a thoroughly hygienic pool is worth a little effort.
Fast, accurate, simple testing
Scoop water into the test chamber and add reagent
Accurate results on the following:
Free Chlorine 0 - 6ppm
Total Chlorine 0 - 6ppm
pH 6.8 - 8.4
Cyanuric Acid 5 - 160 ppm
Total Alkalinity 10 - 300ppm
Each Digital Tester comes complete with the following tablets:
20 x DPD no1 - Free Chlorine Test Tablets
20 x Phenol Red - pH Test Tablets
10 x DPD no3 - Total Chlorine Test Tablets
10 x Cyanuric Acid - UV Stabiliser For Chlorine Test Tablets
10 x Total Alkalinity - Tests The Amount Of Dissolved Alkalinity In The Water.
Please Follow This Link For A Brief Over View Of the Device:
temperature-compensated LED (λ= 530 nm) and photo-sensor
power supply 2 batteries (AAA), capacity minimum 500 tests
automatic switch-off approx. 5 minutes after last key press
Dimensions 145 x 70 x 45 mm (L x W x H)
Weight approx. 165 g (incl. batteries)
Operating temperature: 5 – 40°C
Conditions relative humidity: 30 – 90%, non-condensing